IDX CW-7 (CW 7 CW7) Uncompressed Wireless HD Video Transmission System
IDX CW-7 (CW 7 CW7) UNCOMPRESSED WIRELESS HD VIDEO TRANSMISSION SYSTEM
PROMOTION - A
Customers wishing to trade in a working CW-5 HD System are eligible for a £850.00 CASH BACK OFFER. Just order a NEW CW-7 and IDX will raise a credit against the order for £850.00
Note- CW-7 promotion packag A trading in working CW-5HD must be returned to IDX Langley for credit.
PROMOTION - B
For those customers without a CW-5HD to trade in, then Purchase a NEW CW-7 at normal trade price and IDX will supply and invoice FREE of charge 2x IDX DUO-150 Batteries woth £870.00
Note CW-7 promotion package B including free of charge 2 x DUO-150
Uncompressed Wireless HD-SDI/SDSDI Transmission System
The new and improved CW-7, uncompressed wireless HD-SDI/SDSDI transmission system delivers superior image quality up to 300ft, while maintaining a zero frame delay. Perfect for outdoor or indoor productions and events, the CW-7 wirelessly transmits HD video and audio from a professional camera to a monitor. Event, television, and film productions can save time on prep by eliminating long cable runs from the camera to video village or display. Dynamic Frequency Selection allows CW-7 to operate on less crowded channels within the license exempt 5GHz spectrum.
Transmitter and Receiver Specifications
Frequency: 5.190GHz – 5.795GHz
Tuning Range / Frequency Selection: Four selectable channels or one auto select/DFS
Select Transmit Power: 80mW maximum (TX only)
Transmitter/Receiver Antenna: Internal 18dBi gain
Transmit Method: MIMO
Modulation: Orthogonal Frequency Diversity Multiplexing (OFDM)
Latency: Less than 1ms
Video Input: HD-SDI (SMPTE 292M) and SD-SDI (SMPTE 259M-C)
Video Formats: HD-1080/60i, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 1080/24p, 1080/23.98p, 1080/30PsF, 1080/29.97PsF, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, SD-4:2:2 YcbCr 10bit, 525i/59.94, 625i/50
Audio Input (TX)/Audio Output (RX): Two channels SDI embedded
Power Requirement: 11-18V DC via battery plate or 4-pin XLR connector
Power Consumption: 12W approx.
Dimension: 6.22(W)x2.83(D)x7.40(H) inches
Weight: 1.76 lbs approx.
Optional mounting installation for A/B 3-stud version is available for any or all sides of the transmitter and receiver modules. Factory-installed one-centimeter spacers for monitors or other source attachment to the CW-5HD TX or RX is also an option. Contact IDX Sales to confirm specific model compatibility before ordering.
Important FCC rules and regulations: Wireless operation on the 5GHz U-NII spectrums do not require users to obtain a license; however, the FCC has strict regulations and requires wireless devices to support DFS when operating on frequency ranges 5.250GHz-5.350GHz and 5.470GHz-5.725GHz. Weather and US government agency radar systems operate on these frequencies and must not be interfered with. The DFS function will detect and vacate channels that are in use by weather and US government agency radar systems.
· FCC prohibits transmission power modifications and hardware modifications by the user.
· FCC prohibits the ability to change frequencies and region codes by the user.
· FCC prohibits importation and use of non US approved transmitters in the US.
· FCC strongly prohibits manufacturers and/or distributors to offer non US approved transmitters; this includes modifications to the original hardware and/or software.
· FCC only authorizes the use of wireless equipment specifically made for and shipped in the US market.
Violators of these rules and regulations may face legal action.